The high temperature adhesive tape has a smooth surface, good anti-viscosity, chemical corrosion resistance and high temperature resistance as well as excellent insulation performance. It is widely used in packaging, thermoplastics, composite, sealing, heating, electronic and electrical industries. The following is a description of the surface treatment of the following joints:

1, using a steel needle wheel to wear the surface of the cloth layer and the transition area rough.
Note: The purpose of grinding is to remove surface pollution and increase the surface activity and roughness of the adhesive and cloth. Retaining the adhesive on the cloth layer is beneficial to the adhesive force of the high temperature tape joint. Be careful not to damage the cloth when grinding.

2, brush glue on the polished cloth layer and the transition surface of the benchmark line.

3, paint plastic pulp for two times. When glue coating, do not do too much, do not leak coating. The thickness of the first brush gum is about 0.1 mm, and the thickness of the second brush pulp is about 0.2 mm. Every time you brush the glue, it must be cold and dry. The purpose of drying is to make all the solvents in the slurry go away, and the degree of drying can be easily applied to the finger adhesive surface, which is suitable for non-stick hands.

4，when the slurry is dry enough not to stick to the hand, the next step can be performed.