Although the tape is very convenient to use, it is also methodical.

In fact, it is very simple to improve the adhesive effect of adhesive tape. First, the adhesive surface needs to be cleaned and dried. After the cleaning solvent is dried, the adhesive tape is bonded to the adhesive surface. Pressure is applied to the adhesive surface by drum or other means, so that the adhesive tape can be effectively bonded, then the stripping paper can be torn off, and the adhesive materials need to be bonded, and the same pressure is applied to make the adhesive tape bond effectively. If air bubbles need to be removed, pressure will need to be increased, and the upper limit of pressure will be the material's endurance.

When bonding tape, one end should be bonded first, then slowly pressed to the other end to reduce the probability of bubble formation, so as to avoid affecting the bonding effect.