In my life, I think we 've all experienced the experience of being stuck on a car, especially the various certificates attached to the windshield after the car was examined and the car stickers that we attached to it. After tearing off, the residual glue affects the beauty of the body. So, how does the body dry glue label remove?

Because the adhesive used in the trademark label is not resistant to high temperatures, it is first baked with a warm wind dryer. After the viscosity of the trademark or seal is weakened, it can be torn clean and leave no traces. What if it's been torn off? You can look below to remove the body of the non-dry glue method.

1, use wind oil essence. In the want to remove the adhesive paste thick coated with a layer of wind oil essence, so that the oil fine immersion dry adhesive paste, wait a moment, with dry cloth to wipe, you will find that dry adhesive paste is easy to fall off, and there are no traces.

2，There is also a very simple way we can wipe it off with an eraser. And there won't be any scratches. It's fast.

3, alcohol, gasoline or nail polish, hand cream, air cream thinners can help easily and completely remove these dry glue. The method is to tear off the surface of the label, smear it with alcohol or gasoline, etc., and then rub it on the surface with your hands to make it fully impregnate the adhesive, and finally wipe it with cloth.
However, with these solvents, it is also possible to cause damage to the surface of the body. The better method is to use the electric blowing wind to dry the adhesive part, and then use wet cloth friction to remove the adhesive.